How to install K-tag 2.13 KTM100 Software on laptop

latest K-tag ecu programmer firmware have be updated 7.003 Ktag version,  7.003 ktag hardware can working on 2.13 K-suite / 2.13 KTM100 software, New KTM100 software is much better than ordinary K-suite software, here, vipprogrammer.com will share  installation instruction of 2.13 KTM100 Software, and guide you how to install 2.13 K-suite / 2.13 KTM100 software on your laptop correctly.

Software Version: Ktag KTM100 V2.13
Firmware: V7.003

KTM100 V2.13 Support vehicle list:

www.obd2tek.com/obd2tunig/Ktag%202.13%20Ktag%20firmware%20V7.003%20Ktag%20KTM100%20V2.13/Ktag 2.13 Ktag firmware V7.003 Ktag KTM100 V2.13 Support vehicle list.xlsx

Ktag 2.13 Ktag Firmware V7.003 software Ktag KTM100 V2.13 installation:

1). Install KTAG KTM100 V2.13 setup:

Open KTM100 setup in the CD software on My computer


Open KTM100 file, then open KTM100 English file (1st file).

Open KTAG KTM100 setup and install Microsoft Visual C++2005.


Install Adobe Reader 7.0.8.



Confirm Setup settings and copy file to Local Disk C automatically.


2). Install K-tag KTM100 V2.13 driver

Open Driver folder on KTM100 folder and install it.


Select Driver language.

Click Next.

Click Next in Read Me File window

Press Next to start installation.

Driver installation is completed, press Finish button.


3) Connect ktag 2.13 with ktag firmware V7.003 from obd2tuning.com.

Connect the K-TAG ECU programmer with vehicle and wait the system to find the hardware driver and install it.


Open My Computer>>Manager>>Device Manager>>Universal Serial Bus controllers>>DimSport-New Trasdata Device to check and make sure there is good communication between K-tag and computer.

4) Run obd2tuning.com Ktag KTM100 V2.13 software.

Open KTM100 software on the desktop.

Press OK when system display an message “Error during the server .connection” to continue.

Select Options tab to choose the language you want.



Check vehicle and ECU type list on Info Plugins tab.


Select certain ECU brand and tick Checksum Info button on the bottom, another window will bring the checksum information.


Select Interface tab, and select vehicle make, model, engine and year information. Here is example of program VW Bosch EDC17 ECU. Then press ID button, confirm you have selected the correct connection mode.



Then the ECU information will fully displayed on the REPORT column.

Select read/write ECU via Micro, EEPROM etc on OPERATION part, click on Read.


After complete read ECU, save your file to a certain folder.



Check ECU plugin and tick Manual icon to view detail plugin.